Call Us : +91 - 9840033239

 

Pet Compressor (For Pet Bottling Application)

The ELGI Advantage
Features Benefits

 
Suction Unloaders:

  • Helps operate the compressor for longer durations at PET blowing applications demand over 16 hours of operation per day.

Flanged Joints:

  • Flanged joints to prevent compressed air leak. It is easier to torque-tighten these joints during maintainance.

Deep finned cylinders & After coolers:

  • Ensures that the compressor block is properly cooled while operating at higher pressures.

Disc Valves:

  • Disc valves for suction and delivery ensure improved volumetric efficiency of compressor thereby preventing loss of compressed air. .

Delivery Unloaders:

  • Operator need not worry about manually bleeding the compressor whenever motor switches off cg: power failure. Compressor will bleed automatically and will start up smoothly whenever power is restored.

Safety Valves:

  • Sealed valves ensure operator safety as compressors operates at maximum pressure of 33 bar.

Air Receiver:

  • Built as per ASME design standards for safety of the PET blowing plant.

Starter Box:

  • Starter box contain selector switch with provisions for continuous/intermittent operation of compressor according to plant load.
 
Model Power Piston Displacement FAD   Compressor Working Pressure Tank Cooling Weight Dimension Air Outlet Port Size
  HP KW m3/min cfm m3/min cfm stages rpm kg/cm2 psi liters   kg (lxbxh)mm BSP inches
HP 15 300 15 11 1.17 41.27 0.85 30 2 875 30 426 500 AC 740 1980Xx865x1405 3/4
HP 20 330S 20 15 1.53 54 1.09 38 2 1150 33 479 500 AC 780 1978x843x1464 3/4
HP 20 330S 20 15 1.53 64 1.09 38 2 1150 33 479 BM AC 640 1463x775x865 3/4
HP 20 330 WC 20 15 1.54 54.26 1.08 38 2 1150 33 479 500 WC 780 1980Xx865x1405 3/4
HP 20 400S 20 15 1.47 51.96 1.05 37 3 850 40 569 BM AC 500 1450x845x949 3/4 (New)
Note:
BM = Nase Mount AC = Air Cooled WC = Water Cooled
Free Air Delivery measured as per IS 5456
Standard model Class available F Protection with 415V. and squirrel Dtat Delta cage Starter 3 Phase

Technical Specifications:Overall dimension LxBxH(mm): Air receiver model 1978 x 843 x 1455 Base mounted model I x 775 x 895

  • Free air delivery measured as per IS 5456
  • Standard model available with 415V, squirrel cage, 3 phase inductor with IP 55, class F insulation
  • Models with 500L air receiver and base mounted variants available
  • Unit with 500L air receiver supplied with oil moisture separator
  • Units with 380V/50Hz units are available on request
  • Compressors with water-cooled option available
  • Vertical air receivers available on request